SELF LEVELING POLYUREA ELASTOMER EPL™ 1.5 is a high-strength, self-leveling, semi-rigid polyurea elastomer. Due to its high tensile strength, tear strength, and tensile modulus, EPL™ 1.5 is very resistant to deformation with over 400% elongation. This optimal balance of physical properties makes EPL™ 1.5 an ideal choice of polymers for filling or repairing construction joints, random cracks, joint…
ENVIRONMENTALLY FRIENDLY SPRAY FOAM & IGNITION BARRIER SPRAY FOAM ENVELO-SEAL™ 2.0 IB W spray foam wall insulation is a two-component polyurethane foam insulation system. It has a 1.9 – 2.2 PCF spray in place density. ENVELO-SEAL™ 2.0 IB W was developed using an EPA approved zero ODP blowing agent. This product provides superior energy efficiency…
ELASTOMERIC MULTI USE POLYUREA ELASTAFLEX™ 1.0 is a economical blend of aliphatic and aromatic polymer chemistry with greater color/gloss retention and more UV resistance than aromatic polyureas*. ELASTAFLEX™ 1.0 is formulated to be processed through a SPI Synergy proportioner such as the LPG or TI-13D. FEATURES • 100% solids, no solvents, and no VOCs. •…
ELASTOMERIC BRIDGING POLYUREA AQUASEAL™ HI-RISE X5 (X5) is a unique elastomer that expands approximately 500% of its original volume during the spray application. In place yield is ±80 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOAD™ gun. As X5 rises, it bridges substrate imperfections to virtually eliminate blowholes…
ELASTOMERIC BRIDGING POLYUREA AQUASEAL ™ HI-RISE X3 (X3) is a unique elastomer that expands approximately 300% of its original volume during the spray application. In place yield is ±50 mils per gallon per 100 sq. ft. when sprayed through a SPI LOCK N LOAD™ gun. As X3 rises, it bridges substrate imperfections to virtually eliminate…
POLYURETHANE POUR FOAM – CLOSED CELL SPI ENVELO-POUR™ SFC I 2.0 CG is a two-component, rigid polyurethane foam system. Designed for pour foam applications where constant flow characteristics and even density distributions are preferred. Its inherent fast initiation and slow rise times make it suitable for pouring with plural component equipment or hand mixing and…
SPI ENVELO-POUR ™ 2.0 – 30.0 – ENVIRONMENTALLY FRIENDLY POUR FOAM AVAILABLE IN 2.0 LB – 30 LB DENSITY SPI ENVELO-POUR ™ closed cell 2.0 lb – 30 lb density is a two component, rigid polyurethane system for pour foam applications. This foam is low viscosity and is specifically designed for pour operations to produce…
ENVIRONMENTALLY FRIENDLY SPRAY FOAM CLOSED-CELL ROOFING FOAM INSULATION ENVELO-SEAL™ 2.7 CLI S is a two-component closed-cell polyurethane foam insulation system, designed for spray applications. ENVELO-SEAL™ 2.7 CLI S was developed using an EPA approved Zero ODP blowing agent. This product provides superior energy efficiency and air infiltration control. This product is an approved roofing material. RECOMMENDED…
ENVELO-SEAL™ 0.5 OC is the “B” component of a two component polyurethane foam insulation system processed at a 1:1 by volume. It has a 0.50 PCF spray in place density. ENVELO-SEAL 0.5™ OC is an open cell, water blown hybrid foam insulation system. This product provides superior energy efficiency and air infiltration control. The product…
ELASTOMERIC BRIDGING POLYUREA AQUASEAL™ is a state-of-the-art, high performance, spray applied plural-component pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and MDI prepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance. FEATURES • 100% solids, no solvents, and no VOCs. • Extended tack time…
