PMC Spray Guns

AP-2 Air Purge Spray and Pour Gun

SPI – PMC AP-2 Air Purge Spray Gun Brochure

The PMC AP-2 Series Spray/Pour Gun incorporates a patent pending separate chamber and Pattern Control Tip (PCT) giving the option to create a variety of spray patterns as well as the ability to create different back pressures to custom mix foam and coatings. In addition, an adhesion resistant gun finish minimizes foam and coatings buildup on the gun body and hardened coated PCT and multi-directional PCT air blasters keep the tip clean. The AP-2 is the lightest, lowest priced US manufactured air purge gun on the market.

Lightweight Compact Design

Weighing a mere 2.1 lbs (w/o coupling block), the compact AP-2 Spray Gun is nearly a half pound less than other air purge spray guns on the market.

Short Trigger Stroke

Reduces operator fatigue, develops an immediate spray pattern and makes the gun extremely responsive.

Check Valves

Prevent intrusion of foam or coatings into the pneumatically operated components of the gun in the event of a crossover.

Advanced Pattern Development and Mixing

The patent-pending chamber/PCT design provides a multitude of spray pattern and mixing combinations. The operator can easily change the size and configuration of the PCT from outside the gun without having to take the gun apart. PCTs available in Round, Flat, Blaster and Pour configurations.

Ability to Mount Different Style Gun Handles

The handle on the AP-2 is modular with a dove-tail mount. The handle can be removed and replaced with a custom designed handle, mounted to robotics or easily replaced if damaged.

Adhesion Resistant Gun Finish

The entire surface area of the AP-2 is coated with a special impregnated adhesion resistant block oxide coating that allows for easy removal of overspray buildup on the gun body.

PMC Rotational Head

The head of the Gun Block can be easily set in two opposing directions which will facilitate hose entry from either the top or bottom of the gun.

Coupling Block

Provides the contractor with quick and clean removal of the gun from the proportioner hoses.

AP-1 Air Purge Spray Gun

SPI – PMC AP-1 Air Purge Spray Gun Brochure

The PMC AP-1 Air Purge Gun is “Designed with the Customer in Mind” to provide applicator friendly and serviceability at an economical price to meet today’s market place demands.

360 Degree Rotational Head

The Head or Gun Block can be easily set in two opposing directions which will facility hose entry from either the top or bottom of the gun. The hose orientation is strictly an operator preference. The AP-1 rotational ability gives the operator the ability to customize his hose entry to suit his needs and comfort.

Quick Change Mixing Chamber

The AP-1 mixing chamber can be easily removed from the front of the gun simply by removing the air cap and loosening the hex head bolt from the rear. The chamber easily slides out the front and a new chamber or one of a different size or pattern can be quickly re-installed.

Easy Access to Internal Parts

There is no need on the AP-1 gun to remove the coupling block to access the internal parts.

One Piece Machined Mixing Chamber

The mixing chambers for the AP-1 Gun are machined out of a solid piece of steel, hardened and then final ground to give a mirror like finish to accept the side seals. This one piece rugged construction prevents damage to the tip.

Heavy Duty One Piece Machined Gun Block

The Gun block on the AP-1 is offered in either aluminum or steel. Each is machined out of a solid piece of base material to minimize the amount of parts and O-rings used in the gun. The gun is shipped standard with the aluminum gun block and steel is offered as an option.

Innovative Air Cap Design

The Heavy duty air cap design not only provides purge air to keep the tip clean, its rugged design also provides added protection for the spray tip. Bottom or Rear Air Hose Entry: To further satisfy the needs of the operator, the AP-1 gun is provided with a brass nipple to connect air through the handle of the gun. If the operator prefers a rear air hose entry you simply remove the nipple and replace it with a hole plug and attach the air hose fitting to the rear of the gun.